Gallery Items tagged Project / Lab Report
If you conduct a scientific experiment or undertake a piece of research, you’ll usually need to write up a corresponding project or lab report, to summarize the objective of your task, the methods you followed, the results you obtained, and the conclusions you drew from your work. Here we provide a sample of great templates for producing such reports, which include layout guidelines to help guide you through the process.

ERCESI Academic Research Report
ERCESI Weekly Report template.
ERCESI

Decreasing groundwater quality at Cisadane riverbanks: groundwater-surface water approach
The decreasing of groundwater quality has been the major issue in Tangerang area. One of the key process is the interaction between groundwater and Cisadane river water, which flows over volcanic deposits of Bojongmanik Fm, Genteng Fm, Tuf Banten, and Alluvial Fan. The objective of this study is to unravel such interactions based on the potentiometric mapping in the riverbank. We had 60 stop sites along the riverbank for groundwater and river water level observations, and chemical measurements (TDS, EC, temp, and pH). Three river water gauge were also analyzed to see the fluctuations.
We identified three types of hydrodynamic relationships with fairly low flow gradients: effluent flow at Segmen I (Kranggan - Batuceper) with 0.2-0.25 gradient, perched flow at Segmen II (Batuceper-Kalibaru) with gradient 0.2-0.25, and influent flow at Segmen III (Kalibaru-Tanjungburung) with gradient 0.15-0.20. Such low flow gradient is controlled by the moderate to low morphological slope in the area. The gaining and losing stream model were also supported by the river water fluctuation data. TDS and EC readings increased more than 40% from upstream to downstream. At some points the both measurements were two times higher than the permissible limits, along with the drops of pH values at those areas.
This study shows the very close interaction between Cisadane river water and groundwater in the riverbank. Therefore the authorities need to be managed the areas with a very strict regulations related to the small and large scale industries located near by the river.
Dasapta Erwin Irawan, Deny Juanda Puradimaja, Defitri Yeni, Arno Adi Kuntoro, Miga Magenika Julian

Ensayo sobre el impacto de la emisión sincrotrón galáctica en las mediciones de anisotropía del fondo cósmico de microondas
A nice report I did for my Radiative Processes Course.
Andrea Hidalgo

template-plano-de-trabalho-facepe-pibic
Template da UFRPE para plano de trabalho para os editais PIBIC FACEPE.
O plano deve conter até 04 (quatro) páginas, excetuando-se a capa e incluindo-se as referências.
Victor Medeiros

template-projeto-de-pesquisa-ufrpe
Template de projeto de pesquisa nos padrões do edital universal CNPq.
Victor Medeiros

MNR Lab report
Example report for the MNR lab
Abdelrahman Hosney

Шаблон для лабораторных работ
A lab report template in Russian.
Шаблон отчёта по лабораторным работам (Версия от 15.02.2016)
предназначен для использования студентами каф. ПМиИ СамГТУ
при оформлении отчетов по лабораторным работам.
Для настройки пакета listigs использовался материал
статьи Михаила Конника aka virens
[http://mydebianblog.blogspot.ru/2012/12/latex.html]
Copyright (c) 2016 by Mikhail Saushkin (msaushkin@gmail.com)
All rights reserved except the rights granted by the
Creative Commons Attribution 4.0 International Licence
Mikhail N. Saushkin

test simulation plan
This simulation plan aims to explain and document all steps to be taken in the simulation
analysis of the Fokker-100 case. This case is the scenario in which the aircraft touches the
ground during landing, introducing loads on the landing gear. The landing gear consists of
2 rear gears around mid-span and one in the front. Furthermore, the pilot uses the rudder
which induces a lateral force on the tail.
As stated in the assignment, it is required to find the maximum normal stress and location
of this in the fuselage, the maximum shear stress and its location in the fuselage, and the
maximum shear
flow in the frames that introduce the loads from the landing gears into the
fuselage.
Casper

Academic Paper with Figure Included
Chicago Style History Paper which includes figures with \usepackage{wrapfig}
and \begin{wrapfigure}
בנימן הגלילי