This template can be used for preparing project/seminar report for students, especially in APJ Abdul kalam university, Kerala, India. Students from other university also can be use this same template for the project/seminar report. This file contains a sample of a report, so you can edit this.
\documentclass[12pt,a4paper]{report}
\usepackage{graphicx}
\usepackage{amsmath}
\usepackage{fancyhdr}
\usepackage{cite}
\usepackage{framed}
\usepackage{a4wide}
\usepackage{float}
%The below Section make chapter and its name to center of the page
\usepackage{blindtext}
\usepackage{xpatch}
\makeatletter
\xpatchcmd{\@makeschapterhead}{%
\Huge \bfseries #1\par\nobreak%
}{%
\Huge \bfseries\centering #1\par\nobreak%
}{\typeout{Patched makeschapterhead}}{\typeout{patching of @makeschapterhead failed}}
\xpatchcmd{\@makechapterhead}{%
\huge\bfseries \@chapapp\space \thechapter
}{%
\huge\bfseries\centering \@chapapp\space \thechapter
}{\typeout{Patched @makechapterhead}}{\typeout{Patching of @makechapterhead failed}}
\makeatother
%The above Section make chapter and its name to center of the page
%\unwanted packages also included
\linespread{1.5}
%\pagestyle{fancy}
%\fancyhead{}
%\header and footer section
%\renewcommand\headrulewidth{0.1pt}
%\fancyhead[L]{\footnotesize \leftmark}
%\fancyhead[R]{\footnotesize \thepage}
%\renewcommand\headrulewidth{0pt}
%\fancyfoot[R]{\small College of Engineering, Kidangoor}
%\renewcommand\footrulewidth{0.1pt}
%\fancyfoot[C]{2019 - 2020}
%\fancyfoot[L]{\small Name of the project}
\begin{document}
\begin{center}
{\Large \textbf{CONSERVATION VOLTAGE REDUCTION TECHNIQUE: AN APPLICATION GUIDELINE FOR SMARTER GRID.}}\\
\vspace{2cm}
A PROJECT REPORT\\
\vspace{0.5cm}
Submitted by \\
\vspace{1cm}
\textbf{JESTIN JAISON}\\
\vspace{0.2cm}
\textbf{UNI.REG.NO}\\
\vspace{0.2cm}
\textbf{to}\\
the A P J Abdul Kalam Technological University \\
in partial fulfillment of the requirements for the award of the Degree \\
of\\
Bachelor of Technology \\
In\\
Electrical and Electronics Engineering
\end{center}
\begin{center}
\vspace{1.2cm}
\includegraphics[scale=0.2]{CEK-emblem.jpg}
\textbf{DEPT. OF ELECTRICAL \& ELECTRONICS ENGINEERING}\\
COLLEGE OF ENGINEERING\\
KIDANGOOR\\
MAY 2020\\
\end{center}
\thispagestyle{empty}
\newpage
%\Declaration in this page.
\begin{center}
\textbf{DECLARATION}\\
\end{center}
I undersigned hereby declare that the project report ( “Title of project”) , submitted for partial fulfillment of the requirements for the award of degree of Master of Technology of the APJ Abdul Kalam Technological University, Kerala is a bonafide work done by me
under supervision of ( Name of supervisor(s)). This submission represents my ideas in my own words and where ideas or words of others have been included, I have adequately and accurately cited and referenced the original sources. I also declare that I have
adhered to ethics of academic honesty and integrity and have not misrepresented or fabricated any data or idea or fact or source in my submission. I understand that any violation of the above will be a cause for disciplinary action by the institute and/or the
University and can also evoke penal action from the sources which have thus not been properly cited or from whom proper permission has not been obtained. This report has not been previously formed the basis for the award of any degree, diploma or similar title of any other University.
\noindent \begin{minipage}{0.45\linewidth}
\begin{flushleft}
\vspace{1 cm}
Place \\
Date\\
\end{flushleft}
\end{minipage}
\hfill
\begin{minipage}{0.45\linewidth}
\begin{flushright}
\vspace{1cm}
Name of the student\\
\end{flushright}
\end{minipage}
\thispagestyle{empty}
\newpage
\begin{center}
%\vspace{1.5cm}
\textbf{DEPT. OF ELECTRICAL \& ELECTRONICS ENGINEERING}
\textbf{COLLEGE OF ENGINEERING}
\textbf{KIDANGOOR}
\textbf{2018 - 2019}
\end{center}
\begin{center}
\includegraphics[scale=0.2]{CEK-emblem.jpg}
\end{center}
\begin{center}
\textbf{CERTIFICATE}
\end{center}
This is to certify that the report entitled \textbf{ \large Conservation Voltage Reduction Technique: An Application Guideline For Smarter Grid} submitted by \textbf{Jestin Jaison}, to the APJ Abdul Kalam Technological University in partial fulfillment of the B.tech. degree in Electrical and Electronics Engineering is a bonafide record of the project work carried out by him/her under my/our
guidance and supervision.. This report in any form has not been submitted to any other University or Institute for any purpose.
\noindent \begin{minipage}{0.45\linewidth}
\begin{flushleft}
\vspace{2 cm}
\textbf{Project Coordinator} \\
\vspace{0.8cm}
Mr. Anith Krishnan. \\
\footnotesize{Assistant Professor\\
Dept. of Electrical \& Electronics\\
College of Engineering Kidangoor}\\
\end{flushleft}
\end{minipage}
\hfill
\begin{minipage}{0.45\linewidth}
\begin{flushright}
\vspace{2cm}
\textbf{Head of the Department} \\
\vspace{.8cm}
Dr. Indhu P. Nair\\
\footnotesize{Associate Professor\\
Dept. of Electrical \& Electronics Engineering\\
College of Engineering Kidangoor}\\
\end{flushright}
\end{minipage}
\thispagestyle{empty}
\newpage
\chapter*{\centering \large ACKNOWLEDGEMENT\markboth{Acknowledgements}{Acknowledgements}}
I take this opportunity to express my deep sense of gratitude and sincere thanks to all who helped me to complete the work successfully. My first and foremost thanks goes to God Almighty who showered in immense blessings on my effort.
I wish to express my sincere thanks to \textbf{ Prof. K. G. Viswanathan. Principal College of Engineering Kidangoor} for providing me with all the necessary facilities and support.
I would like to express my sincere gratitude to \textbf{Dr. Indhu P. Nair( Head of the department)}, for her support and co-operation.
I wish to express my sincere gratitude towards all the teaching and non teaching staff members of our Department.
Finally I thank my parents, all my friends, near and dear ones who directly and indirectly contribute to the successful of this work.
\begin{flushright}
\textbf{JESTIN JAISON}
\end{flushright}
\thispagestyle{empty}
% Please remove and edit percentage(%) Symbol, if you want this Acknowledgement page in your report. As per ktu guideline, this page is not necessary.
\begin{abstract}
%\pagenumbering{roman}
Overall electric energy conservation and improvement in electrical energy efficiency has been a topic of interest to the electric power industry for long time, since 40\%\ of total primary energy used is in the form of electricity. There are many facets to the energy conservation and/or energy efficiency techniques. Energy conservation by voltage reduction popularly called “CVR” has recently gained some momentum, in particular, to reduce the peak demand. This is also an integral part of the discussion in the future smarter grid technology. This paper addresses the pros and cons of the Conservation Voltage Reduction application including a thorough literature search, practical applications and a quantifiable measure of its actual amount of energy saving from utilities and the cost associated with it. It is expected that this paper will serve as a foundation to all practicing engineers addressing the issue of CVR.
\end{abstract}
\pagenumbering{roman}
\tableofcontents %This command used for index.
\listoffigures
\listoftables
\newpage
\begin{center}
\textbf{ABBREVIATIONS}
\end{center}
HAS \hspace{.5cm} High Altitude Simulation \newline
LMTD \hspace{.3cm}Logarithmic Mean Temperature Difference \newline
PDF \hspace{.5cm} Probability Density Function\newline
\vspace{2cm}
\begin{center}
\textbf{NOTATION}
\end{center}
A Area, $m^2$ \newline
E Voltage, V\newline
Re Reynolds number\newline
T Temperature, K\newline
\thispagestyle{empty}
\chapter{ INTRODUCTION} Introduction
\pagenumbering{arabic}
\section{GENERAL BACKGROUND}
\chapter{LITERATURE SURVEY}
\section{THEORETICAL INVESTIGATIONS}
Theoritical Investigation
\subsection{Optimisation studies}
Check the code corresponding to below figure for the steps of how to add image file to sharelatex. Steps also written before the code. Use the same step for add images.
And this is mention of figure \ref{fig:Ansivol} in this paragraph.
%First upload an image using the third button below the MENU OPTION in left corner.The image name should be single word.
%the uploaded name should be mention in the second bracket of include graphics , and scale can be changed to adjust the size of the fig.
% Caption can be write, that shown below the figure
% label is also can be use for mention fig number in any paragraph
\begin{figure}[H]
\centering
\includegraphics[scale=0.7]{Optimisation.png}
\caption{ Name of the image }.
\label{fig:Ansivol}
\end{figure}
\subsection{Sample Equation}
This is sample of equation \ref{eqn:sample}
\begin{equation}
CVR_f = \sqrt{\frac{\%Reduction of Quantities+V_{rms(MAX)}+V^{(ref)}}{\%VoltageReduction}}
\label{eqn:sample}
\end{equation}
\subsection{Sample Table}
Sample table \ref{tab:table1} based on American papers \cite{ref1}
\begin{table}[h]
\begin{center}
\begin{tabular}{|c|c|c|c|l}
\cline{1-4}
\textbf{Sl.No} & \textbf{Heading 1} & \textbf{Heading 2} & \textbf{Heading 3} & \\ \cline{1-4}
1 & Detial 1 & Detial 2 & Detial 3 & \\ \cline{1-4}
2 & Detial 4 & Detial 5 & Detial 6 & \\ \cline{1-4}
3 & Detial 7 & Detial 8 & Detial 9 & \\ \cline{1-4}
\end{tabular}
\caption{Sample table}
\label{tab:table1}
\end{center}
\end{table}
\chapter{MODELLING}
\chapter{RESULTS AND DISCUSSION}
\chapter{Conclusion}
\begin{thebibliography}{99}
\bibitem{ref1} Wikipedia
\bibitem{ref2} Google.com
\end{thebibliography}
\end{document}