Final year B.E. GIT Report in LaTeX Format
Author
Rahul Kulkarni
Last Updated
há 6 anos
License
Creative Commons CC BY 4.0
Abstract
Start page Report.tex
Individual pages in Chapter folder
Start page Report.tex
Individual pages in Chapter folder
% RULES FOR WRITING THE REPORT:
% Report writing: Project report should written in third person and typed neatly only on one side of the paper
% Paper- A4 size, executive bond.
% Line spacing -1.5, Margin- 3 cm on the left and 2.5 cm on all the other sides
% Font type - Times new Roman
% Font size: Chapter Title -14 point (Bold),
% Main headings- 12 point (Bold) and
% sub-headings and body – 12 point, normal.
% You can include graphs, pictures, data, drawings, design calculations in your report;
% they should be properly numbered and should have the caption.
% Larger drawings, source codes and program could be placed as Appendix.
% The reports must be hard bounded with plastic covering.
% Number of copies:
% a. Both hard copy and soft copy(CD): Student copy, External(Industry) Guide, Department library copy
% b. Soft copy (CD) : Internal Guide/Co- Guide
% Soft copy should contain scanned copies of the inner title page, certificate(s), report, drawings etc.
% Scanned copies and the report should be in pdf format.
% Total pages excluding abstract, acknowledgement, table of contents, list of figures and tables:
% Minimum 40 pages and maximum 75 pages.
% Academic year printed on the side
% Plagiarism check ( 30 %) : Desirable
% Colour of the outer cover/front page of project report (all branches):
% a. Industry sponsored projects: Light Brown
% b. Others: Sky Blue
% The organization of the report should be as follows: Usually numbered in roman
% Declaration
% Abstract or Synopsis
% Acknowledgments
% Table of Contents
% List of table & figures (optional)
% List of Abbreviations
% List of Symbols
% Main body of the report divided appropriately into chapters, sections and subsections.
% The chapters, sections and subsections may be numbered in the decimal form for e.g.
% Chapter 2, sections as 2.1, 2.2 etc., and subsections as 2.2.3, 2.5.1 etc.
% The chapter number must be centered (font size 14) followed by the title of chapter centered (font size 14),
% section/subsection numbers along with their headings must be left justified with
% section number and its heading in font size 12 and subsection and its heading in font size 12.
% The body or the text of the report should have font size 12.
% The figures and tables must be numbered chapter wise for e.g.:
% Fig. 2.1 schematic diagram of set-up , Table 3.1 variation in strength, etc.
% No tab space at the beginning of the paragraph
% Reference OR Bibliography:
% The references should be numbered serially in the order of their occurrence in the text and
% their numbers should be indicated within square brackets for e.g. [3].
% The section on references should list them in serial order in the following format.
% For textbooks – Name of the author(s), Title of the book, Publisher, Edition, Year of publication
% Ex: A.V. Oppenheim and R.W. Schafer, Digital Signal Processing, Englewood, N.J., Prentice Hall, 3rd Edition, 1975.
% For Journal papers – Name of the author(s), Title of the paper, Publisher,Volume no. , Year of publication, Page nos. from – to
% Ex: Devid, Insulation design to combat pollution problem, Proc of IEEE, PAS, Vol 71, Aug 1981, pp 1901-1907.
% For conference papers – Name of the author(s), Title of the paper, Name of the conference, Venue, Year, Page nos. from – to ( from conference proceedings)
% For URL(date of visit/download)
% Ex: https://www.skillsyouneed.com/write/report-writing.html (16.03.2019)
% Important equations must be numbered in decimal form for e.g.
% V = IR ………. (3.2)
% All equation numbers should be right justified.
% Only SI units are to be used in the report.
% Page number: Bottom right side in the footer section
% Header: No
% Footer ( centered): KLS Gogte Institute of Technology, Belagavi
\documentclass[a4paper,12pt]{report} % Paper- A4 size
\linespread{1.3} % Line spacing -1.5 , 1.3 in LaTeX equivalent to 1.5 in Microsoft Word
% Margin- 3 cm on the left and 2.5 cm on all the other sides
\usepackage[top=2.5cm, left=3cm, bottom=2.5cm, footskip=10mm, right=2.5cm ]{geometry}
\usepackage{times} % Font type - Times new Roman
% Font size
\usepackage{titlesec}
\newcommand{\chapfnt}{\fontsize{14}{15}} % Font size: Chapter Title -14 point,
\newcommand{\secfnt}{\fontsize{12}{13}} % Main headings- 12 point (Bold) and
\newcommand{\ssecfnt}{\fontsize{12}{13}} % sub-headings and body – 12 point, normal.
\titleformat{\chapter}[display]
{\normalfont\chapfnt\bfseries} % Font size: Chapter Title (Bold)
{\chaptertitlename\ \thechapter}{14pt}{\centering}{\chapfnt}
\titleformat{\section}[block] % Main headings- (Bold)
{\normalfont\secfnt\bfseries}{\thesection}{1em}{} % [block] displays section number followed by section name
\titleformat{\subsection}[block] % sub-headings normal
{\normalfont\ssecfnt}{\thesubsection}{1em}{}% [block] displays subsection number followed by subsection name
\titlespacing*{\chapter} {0pt}{-50pt}{18pt} % Aligining Chapter , centered
\titlespacing*{\section} {0pt}{3.5ex plus 1ex minus .2ex}{2.3ex plus .2ex} % Section
\titlespacing*{\subsection} {0pt}{3.25ex plus 1ex minus .2ex}{1.5ex plus .2ex} % SubSection
\usepackage{titling}
\setlength{\droptitle}{-4em}
\posttitle{\par\end{center}\vspace{-4em}}
\usepackage{titletoc}%
\titlecontents{chapter}% <section-type>
[0pt]% <left>
{}% <above-code>
{\bfseries\chaptername\ \thecontentslabel:\quad}% <numbered-entry-format>
{\bfseries}% <numberless-entry-format>
{\bfseries\hfill\contentspage}% <filler-page-format>
\usepackage{import}
\usepackage{enumerate} % Bullet , numbered list
\usepackage[utf8]{inputenc} % Use Unicode characters when possible
\usepackage[english]{babel}
\usepackage{fancyhdr} % Footer
\pagestyle{fancy}
\fancyhf{}
\renewcommand{\headrulewidth}{0pt} % Header: No
\fancyfoot[CE,LO]{KLS Gogte Institute of Technology, Belagavi } % Footer ( centered): KLS Gogte Institute of Technology, Belagavi
\fancyfoot[LE,RO]{\thepage} % Page number: Bottom right side in the footer section
\renewcommand{\footrulewidth}{0.5pt}
\usepackage{subfig}
% amsmath and amssymb packages, useful for mathematical formulas and symbols
\usepackage{amsmath,amssymb}
\newcommand{\Z}{\mathbb{Z}}
\newcommand{\N}{\mathbb{N}}
\newcommand{\R}{\mathbb{R}}
\usepackage{xparse}
\usepackage{mathtools}
\usepackage{algorithmic,algorithm2e} %for psuedo code , algorithm
\usepackage{lastpage,fancyhdr,graphicx}
\usepackage{caption}
\usepackage{float}
%\usepackage{subcaption}
\usepackage{tikz}
\usepackage{colortbl}
\usepackage{changepage} % Use adjustwidth environment to exceed column width (see example table in text)
\usepackage{textcomp,marvosym} % textcomp package and marvosym package for additional characters
\usepackage{fixltx2e} % fixltx2e package for \textsubscript
\usepackage{cite} % cite package, to clean up citations in the main text. Do not remove.
\usepackage{microtype} % ligatures disabled
\DisableLigatures[f]{encoding = *, family = * }
\usepackage{rotating} % rotating package for sideways tables
\date{} % Leave date blank
\usepackage{xcolor}
\usepackage[hidelinks]{hyperref}
\usepackage{lipsum} % Generate dummy text (lorem ipsum)
\addto\captionsenglish{\renewcommand{\bibname}{References}} % Title of Biblography page as References
%% END MACROS SECTION
\begin{document}
\pagenumbering{roman} \setcounter{page}{1} % numbered in roman
\newpage \tableofcontents % Generated table of contents
\newpage \listoftables % Generated list of figures
\newpage
{%
\let\oldnumberline\numberline%
\renewcommand{\numberline}{\figurename~\oldnumberline}%
\listoffigures % Generated list of figures
}
\newpage
\thispagestyle{plain}
\import{./}{./chapters/ListOfAbbreviation.tex}
\import{./}{./chapters/ListOfSymbols.tex}
% Chapter numbers (to be numbered in Arabic)
\import{./}{./chapters/1IntroductionObjectivesAndMethodology.tex}
\import{./}{./chapters/2LiteratureReviewAndResearchGap.tex}
\import{./}{./chapters/3PriorArtSearch.tex}
\import{./}{./chapters/4ProblemDefinitionInitialDesignUsingDesignThinkingApproachExperimentationDesignCalculationsFlowchartsAlgorithms.tex}
\import{./}{./chapters/5ResultsAndDiscussion.tex}
\import{./}{./chapters/6ConclusionAndScopeForFutureWork.tex}
\setcounter{secnumdepth}{0} %% no section or subsection numbering
\import{./}{./chapters/References.tex}
\import{./}{./chapters/PapersPublishedCommunicatedPresented.tex}
\import{./}{./chapters/Appendix.tex}
\import{./}{./chapters/AppendixDrawings.tex}
\import{./}{./chapters/AppendixSourceCodeOrProgram.tex}
\import{./}{./chapters/AppendixBillOfMaterials.tex}
\end{document}