# Artificial Neural Networks For Robust Curve Fitting

Author

Shrey Joshi

Last Updated

há 4 anos

License

Creative Commons CC BY 4.0

Abstract

Developing a fast a versatile algorithm for curve fitting with neural networks.

Author

Shrey Joshi

Last Updated

há 4 anos

License

Creative Commons CC BY 4.0

Abstract

Developing a fast a versatile algorithm for curve fitting with neural networks.

Tags

```
\documentclass{article}
\usepackage{arxiv}
\usepackage[utf8]{inputenc} % allow utf-8 input
\usepackage[T1]{fontenc} % use 8-bit T1 fonts
\usepackage{hyperref} % hyperlinks
\usepackage{url} % simple URL typesetting
\usepackage{booktabs} % professional-quality tables
\usepackage{amsfonts} % blackboard math symbols
\usepackage{nicefrac} % compact symbols for 1/2, etc.
\usepackage{microtype} % microtypography
\usepackage{lipsum}
\usepackage{amsmath}
\usepackage{graphicx}
\graphicspath{{Images/}}
\title{\textbf{Artificial Neural Networks For Robust Curve Fitting}}
\author{
%% Shrey Joshi \\
%% Plano East Senior High School\\
%% Plano Independent School District\\
%% \textit{shreyjoshi2004@gmail.com} \\
%% examples of more authors
%% \AND
%% Coauthor \\
%% Affiliation \\
%% Address \\
%% \texttt{email} \\
%% \And
%% Coauthor \\
%% Affiliation \\
%% Address \\
%% \texttt{email} \\
%% \And
%% Coauthor \\
%% Affiliation \\
%% Address \\
%% \texttt{email} \\
}
\begin{document}
\maketitle
\begin{abstract} \normalsize
Curve fitting is a common procedure in any field of science in which we observe some phenomena. However, the current most common methods of doing so are insufficient when scaled up. Therefore, the purpose of this project was to develop a fast and versatile algorithm for curve fitting which exceeds traditional methods in satisfaction of design criteria, which is scalability, flexibility between accuracy and speed, and insensitivity to noise. It was noted that Artificial Neural Networks (ANN) were prime frameworks for this due to inherent features in their mechanics which resolve the above constraints. The researcher tested 10 3-layer ANN architectures with pairs of 3 activation functions and 2 loss minimization methods on datasets generated by 10 distinct classes of mathematical functions and 4 real-world datasets, including an application to civil engineering. A total of 30000 trials were performed. As a benchmark, polynomial regression was tested on the same data with degree in [1, 10]. Data was collected in term of accuracy in Mean-Squared-Error and speed in training time (seconds). It implied that ANNs were more accurate on average, less reliant on parametrization and thus more usable, less susceptible to over-fitting, and slower than polynomials, but negligibly so. A 2-sample t test was run on the individual MSEs of polynomials and ANNs to get a p-value of 0.0370, meaning implications of data are statistically significant. Future research will be conducted on ANNs for predicting polynomial parameters, ANNs for multivariate regression, and RNNs and CNNs for 2D/3D spatial/temporal data.
\end{abstract}
% keywords can be removed
\keywords{Artificial Neural Network \and Curve Fitting \and Dataset \and Polynomial \and Regression}
\vfill
\section{Introduction}
\textbf{Curve Fitting} is the process of constructing a function which well estimates the relationship
between variables in a data set. It holds applications in any field of study in which we graph and analyze
numerical data, and plays a particularly important role in engineering science and physical analysis.
Usually it is accomplished by defining some cost (also error, loss, or objective) function and then using a
method to minimize it.
A very famous approach to curve fitting is through \textbf{Polynomial Regression}: finding the optimal choices of the coefficients of a polynomial of a pre-specified degree by solving a matrix equation of its components to minimize the \textbf{Mean-Squared-Error (MSE)}. When applied to large or complex datasets, such methods are known to react strongly to outliers and succumb to the effects of overfitting. These problems are exacerbated when considering multivariate datasets as it is difficult to determine the data complexity and therefore the order of the optimal polynomial model. As the vast majority of real world phenomena are controlled by multiple factors, the data collected from them is indeed multivariate, and polynomials are thus poor predictors of real-world phenomena.
There do exist iterative algorithms for the minimization of the cost function aforementioned, but they are generally computationally intensive and consequently slow. In addition, they sometimes require human intervention for an initial guess to ensure that the model converges to a correct solution. This raises considerable interest in a versatile algorithm to automate curve fitting which can quickly process large amounts of data, or deal with data in real-time.
In this project we use \textbf{Artificial Neural Networks (ANNs)} as a new technique of determining functional parameters which minimize the value of a cost function, with respect to some dataset. This approach is superior in the sense that it can be applied to large or multivariate datasets, or process data in real time with minimal deviation from a predefined framework, and for that reason it has a remarkably high versatility, and therefore usability. Furthermore, for applications involving intensive computational work, ANNs can be incorporated into special hardware that can harness their hierarchical structures to
achieve very fast processing speeds.
\section{Background Research}
\subsection{A Brief Introduction To The Artificial Neural Network}
\textbf{Artificial Neural Networks (ANNs)} are computational systems loosely modeled after the networks of neurons in the animal brain. Their versatility and ability to solve problems not easily able to be expressed algorithmically comes from the \textbf{fundamentally} different way they approach problems. Examples of these problems include, but are not limited to
\begin{itemize}
\item Image Recognition and Classification
\item Function Modeling and Curve Fitting
\item Image Restoration
\item Language Translation
\item Voice Synthesis and Recognition
\end{itemize}
A notable similarity among these five problems is that they are all non-trivial pattern recognition problems. In this project we investigate Artificial Neural Networks as they relate to the preantepenultimate point on this list, Function Modeling and Curve Fitting.
\subsection{Artificial Neurons}
An Artificial Neural Network is simply a network of \textbf{artificial neurons}, divided into various \textbf{layers}.
There are two major types of neurons: \textbf{perceptrons} and \textbf{sigmoid neurons}.
\subsubsection{Perceptrons}
Perceptrons are the simplest types of neurons, they receive binary inputs and produce a binary output. To compute this output we introduce \textbf{weights}, real numbers signifying the strength of the effect of a particular input on the perceptron's output.
The output, or \textbf{activation}, of a perceptron is determined by whether the value of the \textbf{weighted sum} $\sum_{i=1}^{n}{x_{i}w_{i}}$ is greater than some \textbf{threshold} value. More explicitly,
\begin{equation}
\text{Output} =
\begin{cases}
0 \ \ \ \text{if} & \sum_{i=1}^{n}{x_{i}w_{i}} \le \text{threshold} \\
1 \ \ \ \text{if} & \sum_{i=1}^{n}{x_{i}w_{i}} > \text{threshold}
\end{cases}
\end{equation}
To make the notation less cumbersome, let $x$ and $w$ be the vectors of inputs and their corresponding weights, respectively and define a \textbf{bias} value $b=-\text{threshold}$. Then we get
\begin{equation}
\text{Output} =
\begin{cases}
0 \ \ \ \text{if} & w \cdot x + b \le 0 \\
1 \ \ \ \text{if} & w \cdot x + b > 0
\end{cases}
\end{equation}
\subsubsection{Sigmoid Neurons}
For our network to be able to learn in a predictable manner, we need the output(s) of the networks to be continuous functions of the input(s), however this is not the case with the perceptron model. Hence, we introduce a new type of neuron, the sigmoid neuron.
Sigmoid neurons function exactly the same as perceptrons, except the activation of the sigmoid neuron is not a piecewise function, it's rather defined by $\sigma(w \cdot x + b)$, where $w$ and $x$ are the vectors of the inputs and their corresponding outputs respectively, $b$ is the bias, and $\sigma(z)$ (the sigmoid function) is defined as
\begin{equation}
\sigma(z)=\frac{1}{1+e^{-z}}
\end{equation}
\begin{center}
\includegraphics[width=10.5cm, height=6.75cm]{Sigmoid}
\end{center}
\subsection{Artificial Neural Network Architecture}
Artificial Neural Networks are divided in layers, with an arbitrary number of neurons in each layer. The first and last layers are the input and output layer respectively, and all layers in between are called \textbf{hidden layers}.
\begin{center}
\includegraphics[scale=0.5]{ANN_Architecture}
\end{center}
It is evident that the outputs from layer $l$ are the inputs to layer $l+1$. This repeated process of taking the outputs from one layer and inputting them to the next is called \textbf{forward-propagation}. Neural networks requiring only a forward-propagation system to find the output are called \textbf{feed-forward} neural networks.
When numbers are inputted to the network, they're multiplied by their corresponding weights and inputted to the neurons of the second layer. The weighted sum of each of the neurons is then added to their bias and put into the sigmoid activation function. These values are now multiplied by the weights of the connections between the second and third layers and the process is repeated until the last layer.
If we let
\begin{itemize}
\item $a_{j}^{l}$ denote the activation of the $j$th neuron in layer $l$
\item $w_{j, k}^{l}$ denote the value of the weight connecting the $j$th neuron in layer $l$ and the $k$th neuron in layer $l-1$
\item $b_{j}^{l}$ denote the bias of the $j$th neuron in layer $l$
\item $n_{l}$ denote the number of neurons in layer $l$
\end{itemize}
We can define a universal equation to find the activation of any neuron in our network
\large
\begin{equation}
a_{j}^{l}=\sigma\left(\left[\sum_{k=1}^{n_{l-1}}{w_{j, k}^{l}a_{k}^{l-1}}\right]+b_{j}^{l}\right)
\end{equation}
\normalsize
\subsection{Training An Artificial Neural Network}
The training process of an ANN is highly variable when it comes to the specifics, but the general structure is the following
\begin{enumerate}
\item Define a cost function (also error, loss, or objective function) of the network's parameters
\item Initialize the network with random parameters
\item Iterate a series of steps which changes the network parameters in such a way as to decrease the cost function
\end{enumerate}
\subsubsection{The Mean-Squared-Error Cost Function}
To be able to train our network we must define a \textbf{cost function} (or \textbf{error function}),
showing how well our network is performing. This function takes in the parameters (weights and biases) of the network and a set of \textbf{training data}, which is data from which our network must 'learn', or to be less ambiguous, it is the data from which our network must generalize. In short, it is, quite literally, the training data. One such cost function is the \textbf{Mean-Squared-Error (MSE)} cost
function, or quadratic cost function. The MSE cost function is defined as
\large
\begin{equation}
C(w, b) :\propto \sum_{x}{||y(x)-a^{L}(x)||^2}
\end{equation}
\normalsize
where we write the desired output and actual output of the network as $y(x)$ and $a^{L}(x)$, respectively, as they are functions of the inputs, $x$. Usually the constant of proportionality is $1/2n$ but it does not matter as much as the general form of the equation. The MSE cost function is a good way of determining the error of a network as it gives a high value when even a single desired output is not close to the actual output since the raw difference is squared, and when the two outputs are close together, the raw difference (which is small) is squared to become even smaller, so that point is then basically ignored.
\subsubsection{Gradient Descent (GD)}
\textbf{Gradient Descent (GD)} is the standard method by which we can train an ANN. It involves differentiating the cost function with respect to each weight and bias in the neural network, and using the resulting information to minutely alter each weight and bias to decrease the function. The extent to which each weight and bias is altered is controlled by a \textbf{hyper-parameter} called the \textbf{learning rate}, which is usually denoted by the lowercase greek letter $\eta$.
To make this more explicit, let us define the gradient descent mathematically.
Using the definition of a derivative, we can say that
\large
\begin{equation}
\lim_{\Delta w_{j, k}, \Delta b^{l}_{j} \rightarrow 0}{\left (\sum_{j, k} {\frac{\partial{C}}{\partial{w_{j, k}}} \Delta{w_{j, k}}} + \sum_{l, j}{\frac{\partial{C}}{\partial{b^{l}_{j}}} \Delta b^{l}_{j}} \right )} = \Delta C
\end{equation}
\normalsize
So that for small $\nabla w$ and $\nabla b$ we can approximate
\large
\begin{equation}
\Delta C \approx \sum_{j, k} {\frac{\partial{C}}{\partial{w_{j, k}}} \Delta{w_{j, k}}} + \sum_{l, j}{\frac{\partial{C}}{\partial{b^{l}_{j}}} \Delta b^{l}_{j}}
\end{equation}
\normalsize
And we can make this equation less cumbersome by defining the vectors $\Delta w$, $\Delta b$ to be vectors of changes in each weight, and each bias, respectively, and $\nabla w$, and $\nabla b$ to be equal to $\frac{\partial C}{\partial \Delta w}$ and $\frac{\partial C}{\partial \Delta b}$ respectively.
Thus we can write:
\large
\begin{equation}
\Delta C \approx \nabla w \cdot \Delta w + \nabla b \cdot \Delta w \label{delta_cost_vector}
\end{equation}
\normalsize
Now, it is easy to compute the values of all of the partial derivatives in the vectors $\nabla w$ and $\nabla b$ through computer aided differentiation, and it becomes easier still with the fact that neural networks possess quasi fractal-like architectures. What we wish to compute are the values of the vectors $\Delta w$ and $\Delta b$. To do this, we let
\large
\begin{equation}
\Delta w = - \eta \nabla w \label{delta_w_definition}
\end{equation}
\begin{equation}
\Delta b = - \eta \nabla w \label{delta_b_definition}
\end{equation}
\normalsize
So that if we substitute these value into equation \eqref{delta_cost_vector}, we get
\large
\begin{equation}
\Delta C \approx - \eta(||\nabla w||^2 + ||\nabla b||^2) \label{delta_cost_sub}
\end{equation}
\normalsize
Where $\eta$ is some small, positive parameter, which was aforementioned as the learning rate. Two things that become apparent here from equation \eqref{delta_cost_sub}:
\begin{itemize}
\item For every iteration of the changing of the weights and biases according to equations \eqref{delta_w_definition} and \eqref{delta_b_definition}, $\Delta C$ is always negative
\item The above statement is only true for sufficiently small $\eta$ within the bounds of the approximation of equation \eqref{delta_cost_sub}
\end{itemize}
The only way to ensure with very high certainty that $\Delta C$ will decrease with each iteration of the changing of $w$ and $b$ is to make the learning rate parameter incredibly small (like $1 \times 10^{-30}$), which would make training extremely slow. Thus, to sacrifice a bit of preciseness in favor of practicality is necessary in this situation. This can be done by making $eta$ a moderately small number, such as $0.01$.
Now let us define our weight-update and bias-update rules explicitly. Let $w_{j, k}$ be the initial value of the weight and $w'_{j, k}$ be the updated value. Similarly define $b^{l}_{j}$ and $b'^{l}_{j}$. Then we get
\large
\begin{equation}
w'_{j,k} = w_{j,k} - \eta \frac{\partial{C}}{\partial{w_{j,k}}}
\end{equation}
\begin{equation}
b'^{l}_{k} = b^{l}_{k} - \eta \frac{\partial{C}}{\partial{b^{l}_{k}}}
\end{equation}
\normalsize
This is essentially how GD works. We define a cost function, then repeatedly update the values of the weight and biases based on the learning rate and the derivative of the cost function with respect to each weight and bias until the cost of the network is acceptably low. In this sense, the training is never really \textit{finished}. We rather abandon the training process once the accuracy of our network is sufficiently high. The only way we are forced to stop the training process is if accuracy on the training data reaches 100\%, but in that case it is very likely that the network has overfit.
\subsubsection{Stochastic Gradient Descent (SGD)}
Although Gradient Descent may work perfectly in theory, there exists a hindrance when applying it practically, and that is the time required for training. To find $\nabla w$ and $\nabla b$ we need to average their individual values over all the training data inputs $x$, so learning occurs very slowly. To combat this, a variation of gradient descent is introducted, called \textbf{Stochastic Gradient Descent (SGD)}.
SGD works similarly in principle to normal GD with the distinction that the vectors $\nabla w$ and $\nabla b$ are not computed by averaging over entire training dataset, but by averaging a small, randomly selected sample of it, called a \textbf{minibatch}.
Notationally, let use denote a minibatch of size $m$ as a set of training inputs $(X_1, X_2, X_3, ..., X_m)$. Usually, if $m$ is large enough, then we can expect that
\large
\begin{equation}
\frac{1}{m} \sum_{i=1}^{m}{\nabla w_{X_i}} \approx \frac{1}{n} \sum_{x}{\nabla w_x} = \nabla w
\end{equation}
\begin{equation}
\frac{1}{m} \sum_{i=1}^{m}{\nabla b_{X_i}} \approx \frac{1}{n} \sum_{x}{\nabla b_x } = \nabla b
\end{equation}
\normalsize
Where $\nabla w_{X_i}$ and $\nabla w_{x}$ denote the vectors of the partial derivatives of the cost function with respect to the training input $X_i$ of the minibatch and a training input $x$, respectively. Notation for $\nabla b$ follows similarly.
%\subsubsection{Limited-Memory BFGS Loss Minimization Method}
%\subsection{Regularization}
%\subsubsection{L2 Regularization}
%\subsubsection{L1 Regularization}
%\subsubsection{Dropout}
%\section{Methodology}
\subsection{Engineering Goal}
The main purpose of this project is to demonstrate the effectiveness of Artificial Neural Networks as a curve fitting model, and in particular, display its superiority over traditional methods such as polynomial regression.
There are three major criteria for this ANN model to satisfy:
\begin{enumerate}
\item Very High Scalability
\item Good Flexibility Between Accuracy and Speed
\item Insensitivity to Noise (An Avoidance of Overfitting)
\end{enumerate}
Immediately from our preliminary research we can see that ANNs possess inherent properties which resolve much of the design criteria.
\begin{enumerate}
\item The issue of scalability is very easily avoided just by considering the structure of neural nets. If we want to curve fit a function $f: \mathbb{R}^n \rightarrow \mathbb{R}^k$ then we simply construct a network with $n$ neurons in the input layer and $k$ neurons in the output layer and train it with training data.
\item Since ANNs train by an iterative process, there is a clear speed-accuracy tradeoff, and thus training can be stopped at an arbitrary point in time to sacrifice accuracy for speed or vice versa. This ensures that a researcher can perform a quick approximation of lengthy analysis of any dataset.
\item There exist regularization methods to lower the responsiveness of the training algorithm to random noise in the training data, hence decreasing the effects of overfitting.
\end{enumerate}
\subsection{Virtual Materials}
There were no physical materials in this project, but a multitude of virtual materials were used, which include
\begin{itemize}
\item Python 3.7.0 programming software
\item Numpy Library for fast linear algebra
\item Matplotlib library for easy graphing
\item Sci-kit learn library for neural network construction
\end{itemize}
\subsection{Procedure}
There were three programs developed during the duration of this project, which were for the purposes of
\begin{itemize}
\item Data Collection for the ANN model
\item Data Collection for the Polynomial model
\item Comparison Program which Graphs and a trained ANN and polynomial along with Training and Test data
\end{itemize}
Code for each program can be found in Appendix A
Procedure for the main programs (Data collection) consisted of four main steps
\begin{enumerate}
\item Select ANN/polynomial parameters
\item Generate training dataset
\item Train ANN/polynomial to training dataset
\item Compute data and save to external text file
\end{enumerate}
\Large
\begin{center}
$y=\frac{k}{l}\left(\frac{x}{l} \right)^{k-1}\exp{(-(x/l)^k)}$
\end{center}
\vspace{-0.6cm}
\begin{center}
\includegraphics[scale=0.7]{Function_1.PNG}
\end{center}
\Large
\begin{center}
$y=\frac{1}{x}$
\end{center}
\vspace{-0.5cm}
\begin{center}
\includegraphics[scale=0.7]{Function_2.PNG}
\end{center}
\newpage
\Large
\begin{center}
$y=-(x-p)^2+qx\cos{(x)}+5$
\end{center}
\vspace{-0.5cm}
\begin{center}
\includegraphics[scale=0.7]{Function_3.PNG}
\end{center}
\Large
\begin{center}
$y=\sin{(x)}^2+\sqrt{(x)}$
\end{center}
\vspace{-0.6cm}
\begin{center}
\includegraphics[scale=0.7]{Function_4.PNG}
\end{center}
\newpage
\Large
\begin{center}
$y=k^x$
\end{center}
\vspace{-0.6cm}
\begin{center}
\includegraphics[scale=0.7]{Function_5.PNG}
\end{center}
\begin{center}
$y=kmx/l$
\end{center}
\vspace{-0.6cm}
\begin{center}
\includegraphics[scale=0.7]{Function_6.PNG}
\end{center}
\newpage
\Large
\begin{center}
$y=mx\sin{(3mx-2)}$
\end{center}
\vspace{-0.5cm}
\begin{center}
\includegraphics[scale=0.7]{Function_7.PNG}
\end{center}
\begin{center}
$y=\frac{x^k+1}{kx}$
\end{center}
\begin{center}
\includegraphics[scale=0.7]{Function_8.PNG}
\end{center}
\newpage
\Large
\begin{center}
$y=\sqrt{x^2+m}-\sqrt{2kx}$
\end{center}
\vspace{-0.5cm}
\begin{center}
\includegraphics[scale=0.7]{Function_9.PNG}
\end{center}
\Large
\begin{center}
$y=-mx^4+kx^3$
\end{center}
\vspace{-0.6cm}
\begin{center}
\includegraphics[scale=0.7]{Function_10.PNG}
\end{center}
\normalsize
These functions were chosen because they can simulate a wide range of possible shapes in their graphs. Therefore, by testing with data from these functions, the capabilities of the model were tested in a thorough and scientific manner
Now that miscellaneous information on the methodology has been provided, we may denote the entire procedure as the following:
\begin{enumerate}
\item Construct a three layer ANN of architecture $[1-2k-1]$ with randomly initialized parameters/Select a polynomial order $k$.
\item Select a function, $f(x)$ from the above list from which to generate training data
\item Construct a new function $g(x) := f(x) + m$ where $m$ denotes a random 10\% error based on the normal distribution
\item Generate a training dataset of 15 sample points from $g(x)$
\item Train the ANN model/polynomial model with the training dataset
\item Once the model has been trained, obtain data on
\begin{itemize}
\item Time Elapsed Training
\item Mean-Squared-Error
\item Average Percent Accuracy
\item Number of Epochs Elapsed (ANN only)
\end{itemize}
where accuracies are measure with respect to the function $f(x)$.
\item Save the aforementioned data to an external text file
\item Perform 30 repetitions of steps 2-6 for each function
\item Perform one repetition of steps 1-7 for each $k \in \{1, 2, 3, ..., 10\}$
\item Summarize resulting data (take averages)
\end{enumerate}
\subsection{Major Documentation Of Progress}
There emerged 4 major versions of the ANN program out of the continuous process of testing and bettering the design. Below is a comprehensive list of the version name and the changes associated with it.
\begin{itemize}
\item Version 1 - Basic ANN Mechanics: Training and numerical output of ANN based on input after training.
\item Version 2 - Introduction of Polynomial Regression: Polynomials as a comparison benchmark and graphing of predictions after training
\item Version 3 - Epoch Checking: An acceptable accuracy level is set and after each epoch of training, the ANN model's accuracy is compared to the acceptable accuracy. If it is greater, then training terminates.
\item Version 4 - Update of Accuracy Algorithms: Percent accuracy is introduced and the MSE is updated to be faster
\item Version 5 - Learning Rate Decay: This is the latest update and has not been tested yet. The main addition is the incorporation of a system that stores the parameters of the ANN of the previous epoch, so that if accuracy decreases between two epochs, the code reverts back to the older parametric settings, redefines the learning rate as 2/3 of itself, and continues training. This allows for the existence of learning rate decay without another hyperparameter.
\end{itemize}
A much more inclusive documentation can be found in the project written logbook.
\section{Data}
The cumulative data acquired can be summarized with the following graphs:
\section{Conclusion}
\subsection{General Project Conclusions}
In this project the plausibility of using Artificial Neural Networks (ANNs) as a regression model was tested. It was found that three-layer ANNs usually took longer than polynomial regression and had roughly similar accuracy, however, their rate of overfitting was incredibly lower and their usability was remarkably higher than polynomials. It was also observed that they were much less reliant on initial conditions, unlike polynomials which were very sensitive to their degree, and for this reason, ANNs are so much more resilient than their ANN counterparts.
It was observed that in a three layer network, the optimum number of neurons for speed was around 12, and although there was an improvement of accuracy as the number of neurons increased, there was no big improvement after ~14 neurons
It is theorized that using deeper neural networks will greatly improve performance due to more layers of complexity, allowing the network to model more complicated datasets. This might introduce new problems, however, such as overfitting, but these can be solved with regularization, altering the activation function, and other techniques.
It is intended to continue development of the ANN model and perform testing on multi-dimensional datasets to investigate its scalability. The full potential of ANNs as a curve fitting model was not revealed, but rather previewed in this project. It is conjectured that it will however be revealed upon further development and testing upon multivariate datasets with deeper networks, as this is where we can no longer apply standard methods with confidence.
\subsection{Implications Of Data}
A Two Sample T-test was conducted on the lists of the different Mean-Squared-Errors for the ANN and polynomial models for each individual class of functions. The average p value over these functional classes was computed to be 0.0370, meaning the data was statistically significant.
The data itself strongly implies a number of results:
The pair of activation function and loss minimization method that yielded the highest accuracy (lowest MSE) was hyperbolic tangent + LBFGS.
Testing different network architectures with hyperbolic tangent activation function + LBFGS yielded the result that ~17 neurons tended to be optimal for curve fitting 2D datasets around the complexity of those used in this project.
From qualitative analysis of the graphs produced comparing the predictions of the models, it was found that ANNs were remarkably better for extrapolation than polynomials.
It was also seen from qualitative analysis that ANNs succumbed less to overfitting and hence were more usable, even when the number of neurons in the hidden layer was ridiculously large.
For these reasons, the researcher concludes that Artificial Neural Networks are superior to polynomials for curve fitting.
Unlike the polynomial graphs, there exists variation in the ANN graphs as parameters are initialized randomly (local minima)
\subsection{Real-World Applications}
Curve fitting has a huge plethora of applications in the real-world, some of which include:
\begin{itemize}
\item Predicting concrete failure time through manufacturing data (compressive strength)
\item Mass spectrometry (Applications in radar, sonar, MRI/XRAY, signal processing).
\item Behavioral analysis of populations
\item Migration patterns of refugees
\item Comparing reaction rates (analyzing effects if various catalysts)
\item Predicting motion of one mechanism given another that is contiguous to it, or contiguous to other mechanisms that are contiguous to the mechanism of interest.
\end{itemize}
The last point on this list was lightly tested with ANNs and polynomial and although it was found that the polynomial model attained an accuracy higher by ~1.3\% (given that the correct order was chosen), it was demonstrated that ANNs are indeed well working predictors of natural phenomena.
The ANN model was also tested on other real-world datasets including, but not limited to:
Crank angle vs. displacement of a load of a deep drawing press.
Compressive strength of concrete given age and manufacturing details
Data resembling Weibull Distributions (common probability distributions)
The tests demonstrated that ANNs are applicable to real world situations.
\textbf{Background:}
The Deep drawing press is a metal forming operation which essentially compresses metals with a hydraulic press to alter the shape of the metal.The mechanism used for this consists of three 4 bar chains which link the crank to the sliding press. The process of curve fitting through an ANN has been applied to the link mechanism of this machine.
\textbf{Training Data:} [(0, 46.9), (60, 53.8), (90.0, 58.527), (120, 61.453), (150, 63.302), (180, 65.824), (220, 68.436), (270, 64.256), (313, 53.727), (320, 51.918)]
\newline
\newline
\textbf{Test Data:} [(91, 50.9), (106, 53.5), (121, 56), (136, 58.3), (151, 60), (166, 61.3), (181, 62.2), (196, 63.2), (211, 64.3), (226, 65.6), (241, 67), (256, 68), (271, 68.4), (286, 68.1), (301, 66.8), (316, 64.5), (331, 61.2), (346, 57.4)]
Again, the orange model is an ANN ([1-15-1]), the blue model is polynomial (degree 5) and the red line is the pure function.
\begin{center}
\includegraphics[scale=0.7]{Dataset.PNG}
\end{center}
What is interesting is the effect of drastically changing the number of degrees of freedom for each model. For example, changing the ANN architecture to [1-35-1] while maintaining the polynomial model at degree 3 yields the following graph.
\begin{center}
\includegraphics[scale=0.7]{Dataset2.PNG}
\end{center}
However, if we consider the effect of changing the polynomial degree to even 10 while maintaining the ANN model at [1-15-1] we get the following graph.
\begin{center}
\includegraphics[scale=0.7]{Dataset3.PNG}
\end{center}
The polynomial has overfit to such an extent that when there is a lack of training data near the right edge of the graph, it explodes. In comparison to the ANN model, the polynomial model has a serious overfitting problem. What's more is that the number of degrees of freedom in the ANN model is actually double the amount of the polynomial one due to 50 weights from layer 1 to layer 2 and likewise from layers 2 to 3. Now add on to this the number of individual bias values and we see that the ANN model is remarkably more useful for cases where we don't know the data complexity and hence cannot determine the optimal degree of the polynomial that may curve fit the data.
\subsection{Future Research}
Future research is intended to be on curve fitting with more complex ANNs, particularly deeper ones. Three layer ANNs has shown that ANNs in general have a huge amount of potential in numerical curve fitting and increasing the number of dimensions of freedom will unleash it. The following is a rough list of future work to be done.
\begin{itemize}
\item Using a different gradient descent algorithm. SGD is actually the second slowest. Adagrad or some other momentum based one seems desirable as it avoid local minima.
\item Testing different network architectures. Testing deeper networks is hypothesized to vastly decrease runtime and increase usability, and networks mimicking multivariate functions are hypothesized to be more practical
\item Using the ReLU or Hyperbolic Tangent activation functions. Using the hyperbolic tangent functions as the activation functions for the network could expand the range of the network to negative values, and using ReLU activation functions such as Leaky ReLU could get rid of the need to scale and rescale data entirely. Both of these increase network usability and to a certain extent, accuracy and speed.
\item This is the most important of all: Testing in a more practical way. Current testing was limited to simulating datasets, but curve fitting real-world datasets provides to the testing process a more accurate representation of what the network will be used for and thus is more rigorous.
\end{itemize}
\subsection{Error Analysis}
The following are some choices that may have affected the results:
\begin{itemize}
\item There were five functions used for testing the models. Using more functions to test the two models would have caused more accurate results since they would model a much wider variety of graph shapes.
\item The choice of functions. Sufficiently high degree polynomials fit every function with a high degree of accuracy (> 90\%) except for the asymptotic Function 2 due to the fact that polynomials have poor asymptotic properties. The representation of asymptotic function used while testing may not accurately reflect the distribution of data in the real world which models an asymptotic pattern, and for that reason the data could have been skewed. This problem can be solved in the future by increasing the diversity of the functions used.
\item The constant choice of $\eta$, the learning rate. For different architectures, the optimum learning rates can be different and therefore the data might have been skewed towards the architectures for which $\eta=6.5$ is the optimum learning rate. This issue can be solved in the future by incorporating a random hyperparameter search algorithm for optimizing the learning rate based on the architecture.
\end{itemize}
\end{document}
```

We only use cookies for essential purposes and to improve your experience on our site. You can find out more in our cookie policy.